Huawei AP362 Dual Band Wi-Fi 6 Access Point

Specifications:

• Installation Type: Wall, Ceiling or T-Rail
• Dimensions without packaging (H x W x D) [mm(in.)]: Diameter x depth: 180 mm x 35 mm (7.09 in. x 1.38 in.)
• Dimensions with packaging (H x W x D) [mm(in.)]: 52 mm x 231 mm x 200 mm (2.05 in. x 9.09 in. x 7.87 in.)
• Weight without packaging [kg(lb)]: 0.46 kg (1.01 lb)
• Weight with packaging [kg(lb)]: 0.80 kg (1.76 lb)
• Storage: NAND Flash 256 MB
• Console port: None
•  Maximum power consumption [W]: 11.2 W
• Power supply mode: DC adapter, PoE
• Rated input voltage [V]: 12 V
•  Input voltage range [V]: DC  12 V 10%, PoE  802.3af
• Service port surge protection: PoE port: Common mode (8 wires to ground): 4 kV (1.2/50 us, 42 ohms), criterion C
• Maximum number of physical ports on the entire device: GE (RJ45) x 1, 10M/100M/1000M auto-sensing
• Long-term operating temperature [ C( F)]: -10 C to +50 C (14 F to 122 F) (If the altitude is in the range of 1800 m to 5000 m, the temperature decreases by 1 C or 1.8 F every time the altitude increases by 300 m.)
• Storage temperature [ C( F)]: -40 C to +70 C (-40 F to +158 F)
• Long-term operating relative humidity [RH]: 5% RH to 95% RH
   Long-term operating altitude [m(ft.)]: -60 m to +5000 m (-196.85 ft to +16404.20 ft)
• Atmospheric pressure [kPa]: 53kPa  106kPa ETSI 300 019-2-3
• Ground: Floating ground
• BLE: Not supported
• Radio number: 2
• Operating frequency band: 2.4GHz and 5GHz
• MIMO spatial streams: Radio 0 (2.4 GHz): 2 2 and Radio 1 (5 GHz): 2 2
•  Wi-Fi standard: 2.4G: 802.11b/g/n/ax | 5G: 802.11a/n/ac/ac Wave 2/ax
   Radio interface: Built-in smart antennas

WLAN features:

•  Compliance with IEEE 802.11ax and compatibility with IEEE 802.11a/b/g/n/ac/ac Wave 2
• Maximum ratio combining (MRC)
• Space time block code (STBC)
• Cyclic Delay Diversity (CDD)/Cyclic Shift Diversity (CSD)
• Beamforming
• Multi-user multiple-input multiple-output (MU-MIMO)
• Orthogonal frequency division multiple access (OFDMA)
• Compliance with 1024-quadrature amplitude modulation (QAM) and compatibility with 256-QAM, 64-QAM, 16-QAM, 8-QAM, quadrature phase shift keying (QPSK), and binary phase shift keying (BPSK)
• Target wake time (TWT)
• Low-density parity-check (LDPC)
• Frame aggregation, including A-MPDU (Tx/Rx) and A-MSDU (Tx/Rx)
• 802.11 dynamic frequency selection (DFS)
• Short guard interval (GI) in 20 MHz, 40 MHz, 80 MHz and 160 MHz modes
   Priority mapping and scheduling that are compliant with Wi-Fi multimedia (WMM) to implement priority-based data processing and forwarding.
•  Automatic and manual rate adjustment (the rate is adjusted automatically by default)
•  WLAN channel management and channel rate adjustment
• Automatic channel scanning and interference avoidance
• Service set identifier (SSID) hiding
•  Signal sustain technology (SST)
• Unscheduled automatic power save delivery (U-APSD)
• Control and Provisioning of Wireless Access Points (CAPWAP) in Fit AP mode
• Extended Service Set (ESS) in Fit AP mode
• Advanced cellular coexistence (ACC), minimizing the impact of interference from cellular networks
• Multi-user call admission control (CAC)
• 802.11k and 802.11v smart roaming
• 802.11r fast roaming ( 50 ms)